Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Home > Wall Wireless Access Point   >  1200Mbps in wall AP  >
MFAP830 802.11ax 3000M Wifi6 5G in wall wifi access point for smart home hotel wireless coverage 802.3af poe router with Gigabit RJ45
Model: MFAP830
· European 86 type wall outlet compatibility Design
· High performance MT7981B+MT7976CN+RTL8211FS,
  IEEE802.11ax/ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz
· 256MB DDR SDRAM + 16MB Flash Build-in for Higher Performance
· Gateway / Wi-Fi Repeater / Wireless AP operation modes
· Active 48V PoE supports up to 100 meters (200 feet) deployment
· Wireless LAN Controller Central Management Support
· 1 x 10/100/1000M RJ45 WAN(PoE) Port, 1 x 10/100/1000M RJ45 LAN Port.

Contact: *
Company: MSN/skype:
Subject:
Tel: Fax:
E-mail: * Website:
Content: *
Code: *(marked *should be filled)
 

Main Features

European 86 type wall outlet compatibility Design
High performance MT7981B+MT7976CN+RTL8211FS Chipset, IEEE 802.11ac/n/a 5GHz, IEEE 802.11n/g/b 2.4GHz
256MB DDR SDRAM + 16MB Flash Build-in for Higher Performance
Gateway / Wireless AP operation modes
Active 48V PoE supports up to 100 meters (200 feet) deployment
Wireless LAN Controller Central Management Support

1 x 10/100/1000M RJ45 WAN(PoE) Port, 1x 10/100/1000M RJ45 LAN Port

 

Descriptions

MFAP630 is an 11ax dual band indoor in wall wireless access point, 3000Mbps high data rate (2402Mbps in 5G and 574Mbps in 2.4GHz) and dual band allowing content to download faster. Integrated IEEE 802.3af Power over Ethernet (PoE), it can be installed in areas where power outlets are not readily available, easy installation and lower cost. With wall plate design, build in 86mm size cassette, perfect to integrated into the exist decoration, to supply the most stable wireless signal. Work with WLAN Controller, centralized configuration and management, easy to achieve Wi-Fi Coverage and maintenance.

 

Beamforming Technology Support

MFAP630 supports Beamforming Technology, Wi-Fi signal following to end users, make all users access into stronger wireless signal, improve much in the performance.

 

11ax Technology, Dual Band and 3000Mbps High Speed

Comply with 802.11ax/ac/b/g/n MIMO Technology, up to 1200Mbps wireless data rate to supply abundant bandwidth; Support 2.4GHz and 5GHz dual band, 5GHz Prior, less frequency interference to meet with large data stream request..

 

Adjustable RF Power, Improve Wireless Quality

The transmission RF power is adjustable based on environment. Cut down RF power in place with high density of people or wireless AP to reduce Wi-Fi interference; Increase RF power in large area to improve the signal strength.

 

Smart Roaming and Load Balance Technology

Integrated smart core algorithm, end user will seamless switch to wireless AP with better signal strength, load balance with better performance.

 

Huge Client Access and Concurrent Processing Ability

Deeply optimized the hardware and firmware, max to allow 200 end users to access; Tested 100+ concurrent end users.

 

Multiple Operation Modes

Support Versatile Access Point Mode Gateway/AP, and Ping Watch Dog which

enables the device to reboot itself if the device has any errors. This self-recover feature reduces

the time spent manually configuring the device.

 

Fat/Fit AP together, supply the most stability wireless coverage

Fit AP: Centralized managed by WLAN controller, plug and play, supply the simple but most stable Wi-Fi coverage solution for hotel, school, hospital... FAT AP: with AP, Repeater, Gateway operation mode, users can choose different operation mode based on application and environment to supply the seamless Wi-Fi coverage.

 

Active PoE Power Supply, Stable and Energy Conservation

Comply with IEEE 802.3af standard PoE power supply, same cable supply network data and PoE power together, high efficient, low energy, low heat, long time stable work.

 

Build in Wi-Fi Channel Analysis Tool for best channel

Build in Smart Channel Analysis Tool, help to select the less Wi-Fi Interference channels, ensure the stability wireless signal.

 

Multiple SSID and Tag VLAN Support

It supports multiple SSID up to 8, different SSID can banding different VLAN ID to achieve user isolation and data security.

 

AP Controller Centralized Management Support

Based on CAPWAP protocol, AC controller Centralized Management, easy in installation,

monitoring and management, greatly save the whole cost.

 

Simple to install, easy to use

Fast installation in four steps based on the existed network frame.

 

Specifications

Hardware

Wireless

802.11ax, 3000Mbps MIMO   Technology

Interface

2*10/100/1000Mbps WAN/LAN   Port

1* Reset Button to   restore factory default

Chipset

MT7981B+MT7976CN+RTL8211FS

Flash

SPI NOR   16MB

DDR3L

256M

Antenna

2 * 5.8GHz 2.7dBi internal antenna

2 * 2.4GHz 1.9dBi internal antennas

Power

PoE in: IEEE 802.3af   standard, 48V

Size

86mm*86mm*42.8mm

WIRELESS   FEATURES

Wireless Standards

IEEE 802.11ax/ac/n/a   5GHz; IEEE 802.11 ax/ac/n 2.4GHz

Frequency

5GHz and 2.4GHz

Signal Rate

5GHz:Up to 2402Mbps; 2.4GHz: Up to   574Mbps

EIRP

<20dBm(EIRP)

2.4G PF Power

802.11b

11M

18±2dBm

1M

20±2dBm

802.11g

54M

16±2dBm

6M

18±2dBm

802.11n HT20

MCS7

15±2dBm

MCS0

17±2dBm

802.11n HT40

MCS7

15±2dBm

MCS0

17±2dBm

802.11ax HT20

MCS11

13±2dBm

MCS0

15±2dBm

802.11ax HT40

MCS11

13±2dBm

MCS0

15±2dBm

5G PF Power

802.11a

54M

15±2dBm

6M

17±2dBm

802.11n HT20

MCS7

14±2dBm

MCS0

16±2dBm

802.11n HT40

MCS7

14±2dBm

MCS0

16±2dBm

802.11ac HT20

MCS7

13±2dBm

MCS0

15±2dBm

802.11ac HT40

MCS7

13±2dBm

MCS0

15±2dBm

802.11ac HT80

MCS9

13±2dBm

MCS0

15±2dBm

802.11ax HT20

MCS11

12±2dBm

MCS0

14±2dBm

802.11ax HT40

MCS11

12±2dBm

MCS0

14±2dBm

802.11ax HT80

MCS11

12±2dBm

MCS0

14±2dBm

802.11ax HT160

MCS11

12±2dBm

MCS0

14±2dBm

2.4G   receiving sensitivity

802.11b

11M

-83dBm

1M

-90dBm

802.11g

54M

-70dBm

6M

-84dBm

802.11n HT20

MCS7

-68dBm

MCS0

-83dBm

802.11n HT40

MCS7

-66dBm

MCS0

-83dBm

802.11ax HT20

MCS11

-56dBm

MCS0

-83dBm

802.11ax HT40

MCS11

-53dBm

MCS0

-83dBm

5G receiving   sensitivity

802.11a

54M

-70dBm

6M

-83dBm

802.11n HT20

MCS7

-67dBm

MCS0

-83dBm

802.11n HT40

MCS7

-64dBm

MCS0

-83dBm

802.11ac HT20

MCS7

-58dBm

MCS0

-83dBm

802.11ac HT40

MCS7

-57dBm

MCS0

-83dBm

802.11ac HT80

MCS9

-56dBm

MCS0

-85dBm

802.11ax HT20

MCS11

-57dBm

MCS0

-83dBm

802.11ax HT40

MCS11

-56dBm

MCS0

-83dBm

802.11ax HT80

MCS11

-53dBm

MCS0

-82dBm

802.11ax HT160

MCS11

-51dBm

MCS0

-88dBm

2.4G EVM

802.11b:   ≤-10 dB

802.11g:   ≤-25 dB

802.11n:   ≤-28dB

802.11ax: ≤-35 dB

5G EVM

802.11a:   ≤-25 dB

802.11n:   ≤-28 dB

802.11ac: ≤-32 dB;

802.11ax: ≤-35 dB

Wireless

Auto-Channel   selection

Distance   Control (802.1x Ack timeout)

Multiple   SSID (4 SSID for 2.4G, 4 SSID for 5.8G)

BSSID

PPM

±20ppm

Max   Access Users

120+

Operation   Mode

Wireless   AP, Router

Wireless Security

64/128-bit WEP, WPA / WPA2,   WPA-PSK/ WPA2-PSK encryption

LED Status

Sys(System), WAN, Wi-Fi

Management

System Settings

Web-based configuration   (HTTP/Telnet), Access Control System (SNMP)

Firmware Upgrade

Upgrade firmware via web browser or   TFTP

Administration

Admin Password can be configured

System monitoring

Watch dog, Status in hand , useful   statistic and Event log

Logs

Supports local logs, logs host,   logs file export

Reset

Reset or factory defaults

Backup

Restore settings &   configuration of the device to local file, Scheduled reboot

OTHERS

Package Contents

3000Mbps WiFi6 wireless access   point

Ethernet Cable

Quick Installation Guide

Setting Accessory

System Requirements

Microsoft Windows 98SE, NT, 2000,   XP, Vista™ or Windows 7, Windows 8, Windows 10, MAC OS, NetWare,   UNIX or Linux

Environment

Operating Temperature:-20~55         

Storage Temperature: -40~70
  Humidity: 5%~95% non-condensing

 

 Datasheet_MFAP830_EN_V1.0

Contact us
Tel: +86-13480988514
ADD: FL.#6, F1, Building#3, Shangxiawei Industrial Park, Shasan Road, Shajing, Bao'an District, Shenzhen, Guangdong, China
Official Social Media
Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Copyright © Shenzhen OUTENGDA Electronic Technology Co., Ltd. All Rights Reserved.
Links:
Facebook | Twitter | Linkedin | Google+ | youtube | add more link |