Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Home > Outdoor Wireless Access Point   >  2.4GHz&5.8GHz Dual-band  >
HW9563P 1200Mbps 11AC Outdoor WiFi AP Repeater Wireless CPE Wi-Fi Extender 2.4G&5.8G Wireless Access Point WiFi Signal Booster AP Kits
Model: HW9563P
· High 1000mW Wireless Power Delivers Long-Range Coverage
· Waterproof Housing for Harsh Outdoor Environments
· QCA9563+QCA9882+QCA8334 Chipset, up to 1200Mbps Wireless Speed
· 128MB SDRAM + 16MB Flash Build-in for Higher Performance
· Four External Antenna N Type Connector Maximizes Wireless Connectivity
· Provide a dual-polarization directional high-power outdoor antenna.
· Gateway / Repeater / AP / WISP Client operation modes
· IEEE802.3at PoE supports up to 100 meter (200 feet) deployment
· Wireless LAN Controller Central Management Support

Contact: *
Company: MSN/skype:
Tel: Fax:
E-mail: * Website:
Content: *
Code: *(marked *should be filled)

1200Mbps, Qualcomm CPU, IP67 water-proof

Qualcomm Chipset, Gigabit RJ45 Port, dual-band, 1200Mbps data rate, comply with IEEE802.11ac /n/g/b standard; High Power, multi-operation mode like Wireless AP, Gateway, WISP, WiFi Repeater, work with AC controller and Cloud server for central management and captive portal authentication.



HW9563(P) is a Qualcomm Solution 11ac high power industrial use Outdoor CPE with the next generation 802.11ac Wi-Fi standard, combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps), with an external directional panel ANT(built-in 14dBi 2.4GHz & 17dBi 5.8GHz ANTs) configured, realize outdoor open field directional coverage range about 600meters, equipped Gigabit WAN port, fast Ethernet data rate make more than 128 concurrent end users can access it to enjoy seamless HD movies, streaming, online gaming, wireless security, and other bandwidth-intensive tasks.


Metal waterproof, dustproof and sunscreen shell, temperature adaptive and board protective

HW9563(P) with metal waterproof, dustproof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -40℃ to 70℃. Suit for any country.


High Power design, SMA connector for external antenna, more range, and stable signal

Designed in two line Power Amplifier on PCB board, the power can be 1000mW high power, 4PCS SMA connector, can connect with panel/Omni antenna based on a request, can greatly increase the wifi range and supply the stable wifi signal for users.


Power over Ethernet

HW9563(P) has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.


Access Controller System

Work with WLAN controller in wireless AP operation mode, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore...



1、Comply with IEEE 802.11ac/b/g/n, dual-band, 1200Mbps Data Rate

2、1 10/100/1000Mbps WAN Port, faster Ethernet

3、1000mW high power can connect with external antenna for stronger signal strength and more wireless coverage, 16M Flash, 128M DDR2 RAM, more users, more stable

4、Support IEEE 802.3at PoE standard

5、Support SSID broadcasting, Multi-SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz)

6、Support Gateway (PPPOE, static IP, dynamic IP), Wireless AP, Repeater, WISP operation mode

With the function of build in firewall, IP filter, URL filter and MAC filter

7、Comply with IEEE 802.3az standard, beamforming technology, RF power adjustment and frequency analyzer for better application in a different environment

8、Support DDNS, VPN pass through, Port forwarding and DMZ host

9、Support 64/128-bit WEP security, 128bit WPA (TKIP/AES) security




Chipset QCA9563+QCA9882+QCA8334

Wireless Technology 802.11ac/b/g/n standard, 1200Mbps data rate,  MIMO Technology

Memory 128MB DDR2 RAM

Flash 16MB

Device Interface 1*10/100/1000Mbps auto-negotiation and waterproof RJ45 WAN port

2*2.4G N Connector; 2*5.8G N Connector

1*reset button, press 15 seconds to revert to the default setting

1*external directional panel ANT(built-in 14dBi 2.4GHz & 17dBi 5.8GHz ANTs)

Power IEEE 802.3at standard 48V PoE

Main box size 215mm x280mm x 80mm

Antenna size 1000*114*54mm

Total Weight 12KGS

Data Rate 1200Mbps

Frequency 2.4G: 802.11b/g/n, 5GHz: 802.11a/n/ac



Operating Mode Wireless AP, gateway, WISP, Repeater

Wireless Security 64/128-bit WEP,WPA/WPA2,WPA-PSK/WPA2-PSK encryption

SSID Multiple SSID, 4 SSID in 5.8G and 4  SSID in 2.4G

System requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux

Management Firmware GUI, WLAN Controller


Using environment

Working Temperature: -40°C ~ 70°C

Storage Temperature: -40°C ~ 70°C

Working Humidity  10%~90%  RH does not condense

Storage Humidity  5%~90%  RH does not condense


PACKAGE  HW9563P AP Main Box *1     Directional panel antenna(14dBi&17dBi) *1      Gigabit Poe adapter *1      lightning arrester * 4      Antenna Feeder * 4      English manual*1      Setting accessory*1













Contact us
Tel: +86-13480988514
ADD: FL.#6, F1, Building#3, Shangxiawei Industrial Park, Shasan Road, Shajing, Bao'an District, Shenzhen, Guangdong, China
Official Social Media
Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Copyright © Shenzhen OUTENGDA Electronic Technology Co., Ltd. All Rights Reserved.
Facebook | Twitter | Linkedin | Google+ | youtube | add more link |