Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Home > Network PoE Switch   >  Standard PoE Switch  >
16 ports POE Switch with 16 POE Ports 2 Gigabit Uplink 1*1000Mbps SFP Power to IP Camera, Wireless AP, IP Phone
Supply power to wireless access point(AP) and network surveillance camera through the CAT5 Ethernet cable
16x10/100Mbps PoE ports and 2x10/100/1000Mbps auto-sensing Uplink RJ45 ports +1 Gigabit Fiber Uplink
1~16 ports support standard IEEE802.3af/at power supply
IEEE802.3 10Base-T and IEEE802.3u 100Base-TX compliant
Flow control mode: full-duplex IEEE802.3x standard, half-duplex using Back Pressure standard
Support port auto-flip(Auto MDI/MDIX)
Adopt store-and-forward architecture
Max. PoE Power: 300W (1~16 ports), Max. power per port: 30W/15.4W
Support wire-speed switching, wire speed can be achieved within 64~1536 frame length

Contact: *
Company: MSN/skype:
Tel: Fax:
E-mail: * Website:
Content: *
Code: *(marked *should be filled)

16 ports POE Switch with 16 POE Ports 2 Gigabit Uplink 1*1000Mbps SFP Power to IP Camera, Wireless AP, IP Phone

(16 ports PoE + 2 uplink ports Gigabit +1 Gigabit SFP optical)



This OTD16P-G2S1 switch provides a network point for power supply and data transmission. All the 16 PoE ports can be connected with 10/100Mbps quickly, and the uplink port is 1.25Gbps interface, among which 1-16 ports can provide standard IEEE 802.3af/at power supply. Due to the advanced self-sensing algorithm supply power for IEEE802.3af/at terminal unit, there is no need to worry about damaging proprietary PoE or non-PoE standard equipment. In addition, it will stop power supply when PoE devices are not connected. In short, The OTD16P-G2S1 features simple and reliable design, automatic identification PoE requirements, duplex and high-speed.


This cost-effective OTD16P-G2S1 provides network layout need to simplify wireless access point (AP) and IP-based surveillance cameras network cameras in order to install in commercial network and home network. The devices far away from power socket are very suitable for hanging on the wall or ceiling. PoE eliminates the need for connecting these devices to power socket. So it make more flexible for those difficult to connect with AC power socket, and cut down the installation cost. It is ideal choice for those who want to deploy a small commercial network and home network that use wireless access point (AP) and IP-based surveillance cameras.




  • Supply power to wireless access point(AP) and network surveillance camera through the CAT5 Ethernet cable

  • 16x10/100Mbps PoE ports and 2x10/100/1000Mbps auto-sensing Uplink RJ45 ports +1 Gigabit Fiber Uplink

  • 1~16 ports support standard IEEE802.3af/at power supply

  • IEEE802.3 10Base-T and IEEE802.3u 100Base-TX compliant

  • Flow control mode: full-duplex IEEE802.3x standard, half-duplex using Back Pressure standard

  • Support port auto-flip(Auto MDI/MDIX)

  • Adopt store-and-forward architecture

  • Max. PoE Power: 300W (1~16 ports), Max. power per port: 30W/15.4W

  • Support wire-speed switching, wire speed can be achieved within 64~1536 frame length






Connector Type

16x 10/100Mbps PoE ports and 2x Gigabit auto-sensing RJ45 ports+1 SFP Fiber Uplink

Network Media

10BASE-TX: Cat6 or more UTP(≤250m)

100BASE-TX: Cat5 or more UTP(≤100m)

1000BASE-TX: Cat5 or more UTP(≤100m)

Optical fiber index

multimode fiber: 1310nm, 2km

mode Fiber SMF: 1310nm, 20/40km

              1550nm, 60/80/100/120km



Address Database Size




Network Latency

Maximum delay less than 20 microseconds

Forwarding Mode


Buffer Memory


Network Protocols

IEEE802.3, IEEE802.3u, IEEE802.3x Flow Control, IEEE802.1q VLAN Bridge

IEEE802.3af DTE Power via MDI IEEE802.3af/at

LED Display


FX: Fiber port

Power Supply

Power input: AC100-250V 50/60Hz   (300W 52V 5.76A)

PoE Ports

16 x PoE Ports

Each PoE Port Power

Max 30W(iEEE802.3at), Max 15.4W(iEEE802.3af)

PoE Standard


Working Environment

Operating Temperature: -20℃~50℃;

Storage temperature: -40℃~80℃;

Humidity: 10%~90%, non-condensing;

Storage Humidity: 10%~95%, non-condensing;

Working Altitude: 3,000m(10,000ft);

Storage Altitude: 3,000m(10,000ft)


CE Mark, commercial CE/LVD EN60950


CE Mark, commercial FCC Part 15 Class B VCCI Class B EN 55022 (CISPR 22), Class B

Transmission Distance

Max. 250 meters

Power Supply Type

PoE default power supply is end-span(1/2, 3/6 line pair)

Product Size



What’s Contain
1 * OTD16P-G2S1 PoE Switch

1 * Charging Cable(default cn plug, if you need US/UK/EU/AU plug, pls remark in your order, tks!)

1 * User manual


Instruction Manual download:










Contact us
Tel: +86-13480988514
ADD: FL.#6, F1, Building#3, Shangxiawei Industrial Park, Shasan Road, Shajing, Bao'an District, Shenzhen, Guangdong, China
Official Social Media
Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Copyright © Shenzhen OUTENGDA Electronic Technology Co., Ltd. All Rights Reserved.
Facebook | Twitter | Linkedin | Google+ | youtube | add more link |