Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Home > Wall Wireless Access Point   >  300Mbps in wall AP  >
MFAP610 in wall access point for hotel wifi router with two RJ45 and one RJ11 ports
Model: MFAP610
· European 86 type wall outlet compatibility Design
· High performance QCA9531 Chipset, IEEE 802.11b/g/n 2.4GHz
· 64MB DDR SDRAM + 16MB Flash Build-in for Higher Performance
· Gateway / Wi-Fi Repeater / Wireless AP operation modes
· Active 48V PoE supports up to 100 meters (200 feet) deployment
· Wireless LAN Controller Central Management Support
· 1 x 10/100M RJ45 WAN(PoE) Port, 2 x 10/100M RJ45 LAN Port, 1 x RJ11

Contact: *
Company: MSN/skype:
Tel: Fax:
E-mail: * Website:
Content: *
Code: *(marked *should be filled)

Main Features

European 86 type wall outlet compatibility Design
High performance Qualcomm QCA9531 Chipset, 802.11b/g/n Support
64MB DDR SDRAM + 16MB Flash Build-in for Higher Performance
Gateway / Wi-Fi Repeater / Wireless AP operation modes
Active 48V PoE supports up to 100 meters (200 feet) deployment
Wireless LAN Controller Central Management Support

1 x 10/100M RJ45 WAN(PoE) Port, 2 x 10/100M RJ45 LAN Port, 1 x Phone in Port.



MFAP610 is a 300Mbps wall mount style wireless access point with Qualcomm Chipset, 300Mbps fast data rate, designed for hotel/home mainly to provide secure Internet access in guest room, living room and lobby, equipped with stable PoE power supply solution, suitable for all kinds of business deployment.


European 86 type In-wall Design

Coming with standard size of an electrical receptacle design and stylish appearance, it blends in with most interior decorations in an office or room. You can easily install it into an existing power outlet.


AP Controller Centralized Management Support

Based on CAPWAP protocol, AC controller Centralized Management, easy in installation, monitoring and management, greatly save the whole cost.


300Mbps Wireless N Speed – Extend Wireless Coverage

With wireless speeds of up to 300Mbps and advanced MIMO technology, the MFAP610 provides you with a fast, reliable wireless connection for lag-free online gaming and video streaming.


Active PoE Power Supply, Stable and Energy Conservation

Comply with IEEE 802.3af standard PoE power supply, same cable supply network data and PoE power together, high efficient, low energy, low heat, long time stable work.


High Performance Wi-Fi Antenna, more stable Wi-Fi Signal

Built in 2*2 MIMO Omni ceramic Antenna, Stronger wireless signal and more wireless coverage


Adjustable RF Power, Improve Wireless Quality

The transmission RF power is adjustable based on environment. Cut down RF power in place with high density of people or wireless AP to reduce Wi-Fi interference; Increase RF power in large area to improve the signal strength.


Smart Roaming and Load Balance Technology

Integrated smart core algorithm, end user will seamless switch to wireless AP with better signal strength, load balance with better performance.


Smart LED Wi-Fi button

Press this Wi-Fi button, Wi-Fi Enable, LED around the button turns to green; Press this Wi-Fi button again, Wi-Fi disable, LED turn off. Control the Wi-Fi based on needs, energy saving.


Huge Client Access and Concurrent Processing Ability

Deeply optimized the hardware and firmware, max to allow 64 end users to access; Tested 40+ concurrent end users.


Multiple Operation Modes

Support Versatile Access Point Mode Gateway/Repeater/AP, and Ping Watch Dog which enables the device to reboot itself if the device has any errors. This self-recover feature reduces the time spent manually configuring the device.


Simple to install, easy to use

Fast installation in four steps based on the existed network frame.




Wireless Standards

IEEE 802.11n/g/b 2.4GHz

Data Rate

Up to 300Mbps

Frequency Range


RF Power

11n @MCS7:14±2DB,    @MCS0:16±2DB.

11g @54M:15±2DB,     @6M:17±2DB.

11b @11M:18±2DB,     @1M:20±2DB. 

Receive Sensitivity

11n: [email protected],     [email protected]

11g: [email protected], [email protected]

11b: [email protected], [email protected]


11n: ≤-28 DB

11g: ≤-25 DB

11b: ≤-10 DB

Modulation Type



Auto-Channel   selection

Distance Control   (802.1x Ack timeout)

Multiple SSID




Max. Access Users


Operation Mode

Wireless AP,   Gateway, Wi-Fi Repeater

Wireless Security

64/128-bit WEP, WPA   / WPA2, WPA-PSK/ WPA2-PSK encryption



Qualcomm QCA9531






1 x 10/100Mbps   WAN Port(POE)

2 x 10/100Mbps   LAN Port

1 x Phone in


Reset Button, press   15 seconds to revert to default data


2x MIMO 2.4GHz 2dBi internal omni antennas

Power Supply

PoE, IEEE 802.3af   standard, 48V

Dimensions( W x D x H )



System Settings

Web-based   configuration (HTTP/Telnet), Access Control System (SNMP)

Firmware Upgrade

Upgrade firmware via   web browser or TFTP


Admin Password can   be configured

System monitoring

Watch dog, Status in   hand, useful statistic and Event log


Supports local logs,   logs host, logs file export


Reset or factory defaults


Restore settings   & configuration of the device to local file, Scheduled reboot


System Requirements

Microsoft Windows   98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, Windows 10, MAC   OS, NetWare, UNIX or Linux

Operating Temperature


Storage Temperature


Relative Humidity

5% ~ 95%, Non-condensing

Storage Humidity

5%~95%, Non-condensing



Package Contents

1 x in wall AP

1 x English Installation Guide

Contact us
Tel: +86-13480988514
ADD: FL.#6, F1, Building#3, Shangxiawei Industrial Park, Shasan Road, Shajing, Bao'an District, Shenzhen, Guangdong, China
Official Social Media
Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd. Shenzhen OUTENGDA Electronic Technology Co., Ltd.
Copyright © Shenzhen OUTENGDA Electronic Technology Co., Ltd. All Rights Reserved.
Facebook | Twitter | Linkedin | Google+ | youtube | add more link |