|
Main Features
■European 86 type wall outlet compatibility Design
■High performance Qualcomm QCA9531+QCA9887 Chipset, IEEE 802.11ac/n/a 5GHz, IEEE 802.11n/g/b 2.4GHz
■128MB DDR SDRAM + 16MB Flash Build-in for Higher Performance
■Gateway / Wi-Fi Repeater / Wireless AP operation modes
■Active 48V PoE supports up to 100 meters (200 feet) deployment
■Wireless LAN Access Controller Central Management Support
■1 x 10/100M RJ45 WAN(PoE) Port, 2 x 10/100M RJ45 LAN Port, 1 x Phone In.
Descriptions
MFAP620 is an 11ac dual band indoor in wall wireless access point with LAN port for hotels, cafe, hospital, school, shopping mall and home. Comply IEEE 802.11ac MIMO Technology, 750Mbps high speed, integrated IEEE 802.3af Power over Ethernet(PoE), it can be installed in areas where power outlets are not readily available, easy installation and lower cost; With wall plate design, build in 86mm size cassette, perfect to integrated into the exist decoration, to supply the most stable wireless signal. Work with WLAN Controller, centralized configuration and management, easy to achieve Wi-Fi Coverage and maintenance.
European 86 type In-wall Design
Coming with standard size of an electrical receptacle design and stylish appearance, it blends in
with most interior decorations in an office or room. You can easily install it into an existing
power outlet.
Qualcomm Chipset, Enterprise Wireless Solution
High performance chipset makes Internet faster and solution professional. Core components are all from famous manufacturers.
11ac Technology, Dual Band and 750Mbps High Data Rate
Comply with 802.11ac/b/g/n MIMO Technology, 750Mbps high data rate to supply abundant bandwidth; Support 2.4GHz and 5GHz dual band, 5GHz Prior, less frequency interference to supply a stable wireless coverage.
Adjustable RF Power, Improve Wireless Quality
The transmission RF power is adjustable based on environment. Cut down RF power in place with high density of people or wireless AP to reduce Wi-Fi interference; Increase RF power in large area to improve the signal strength.
Smart Roaming and Load Balance Technology
Integrated smart core algorithm, end user will seamless switch to wireless AP with better signal strength, load balance with better performance.
Smart LED Wi-Fi Button
Press this Wi-Fi button, Wi-Fi Enable, LED around the button turns to green; Press this Wi-Fi
button again, Wi-Fi disable, LED turn off. Control the Wi-Fi based on needs, energy saving.
Huge Client Access and Concurrent Processing Ability
Deeply optimized the hardware and firmware, max to allow 128 end users to access; Tested 100+ concurrent end users.
Multiple Operation Modes
Support Versatile Access Point Mode Gateway/Repeater/AP, and Ping Watch Dog which
enables the device to reboot itself if the device has any errors. This self-recover feature reduces
the time spent manually configuring the device.
Fat/Fit AP together, supply the most stability wireless coverage
Fit AP: Centralized managed by WLAN controller, plug and play, supply the simple but most stable Wi-Fi coverage solution for hotel, school, hospital... FAT AP: with AP, Repeater, Gateway operation mode, users can choose different operation mode based on application and environment to supply the seamless Wi-Fi coverage.
Active PoE Power Supply, Stable and Energy Conservation
Comply with IEEE 802.3af standard PoE power supply, same cable supply network data and PoE power together, high efficient, low energy, low heat, long time stable work.
Build in Wi-Fi Channel Analysis Tool for best channel
Build in Smart Channel Analysis Tool, help to select the less Wi-Fi Interference channels, ensure the stability wireless signal.
Multiple SSID and Tag VLAN Support
It supports multiple SSID up to 8, different SSID can banding different VLAN ID to achieve user isolation and data security.
AP Controller Centralized Management Support
Based on CAPWAP protocol, AC controller Centralized Management, easy in installation,
monitoring and management, greatly save the whole cost.
Simple to install, easy to use
Fast installation in four steps based on the existed network frame.
Specifications
Hardware | |
Wireless | 802.11ac, 750Mbps MIMO Technology |
Interface | 1*10/100Mbps WAN Port, 2*10/100Mbps LAN Port |
1* Reset Button to restore factory default | |
1* Phone In | |
Chipset | QualcommQCA9531+QCA9887 |
Flash | 16M Flash |
SDRAM | 128M DDR |
Antenna | 1 * 5.8GHz 2dBi internal antenna 2 * 2.4GHz 2dBi internal antennas |
Power | PoE in: IEEE 802.3af standard, 48V |
Size | 86mm*86mm*35mm |
WIRELESS FEATURES | |
Wireless Standards | IEEE 802.11ac/n/a 5GHz; IEEE 802.11n/g/b 2.4GHz |
Frequency | 5GHz and 2.4GHz |
Signal Rate | 5GHz:Up to 433Mbps; 2.4GHz: Up to 300Mbps |
EIRP | <20dBm(EIRP) |
Reception Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps,-88dbm@6Mbps. 11b: -85dbm@11Mbps,-94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps,-90dbm@6Mbps. 11n: -70dbm@MCS7, -90dbm@MCS0. 11ac:-60dbm@MCS9, -86dbm@MCS0. |
RF Power | 2.4G: 11n @MCS7:15±2DB, @MCS0:17±2DB. 11g @54M:16±2DB, @6M:18±2DB. 11b @11M:18±2DB, @1M:20±2DB. 5.8G: 11a @54M:15±2DB, @6M:17±2DB. 11n @MCS7:14±2DB, @MCS0:16±2DB. 11ac @MCS9:13±2DB, @MCS0:15±2DB. |
Wireless | Auto-Channel selection |
Distance Control (802.1x Ack timeout) | |
Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) | |
BSSID | |
EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB 802.11a: ≤-25 DB |
PPM | ±20ppm |
Max Access Users | 128 |
Operation Mode | Wireless AP, Gateway, Wi-Fi Repeater |
Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption |
LED Status | Sys(System), WAN, Wi-Fi |
Management | |
System Settings | Web-based configuration (HTTP/Telnet), Access Control System (SNMP) |
Firmware Upgrade | Upgrade firmware via web browser or TFTP |
Administration | Admin Password can be configured |
System monitoring | Watch dog, Status in hand , useful statistic and Event log |
Logs | Supports local logs, logs host, logs file export |
Reset | Reset or factory defaults |
Backup | Restore settings & configuration of the device to local file, Scheduled reboot |
OTHERS | |
Package Contents | 750Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, Windows 10, MAC OS, NetWare, UNIX or Linux |
Environment | Operating Temperature:-20~55 ℃ Storage Temperature: -40~70 ℃ |